Having problems with your Air Conditioners ?

Goodman avptc air handler - Goodman Manufacturing Goodman Variable Speed Air Handler With Flowrator 3 to 5 Ton. AVPTC Model


Answers :

Repair Help & Product Troubleshooting for Air Conditioners
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Goodman avptc air handler - Goodman Manufacturing Goodman Variable Speed Air Handler With Flowrator 3 to 5 Ton. AVPTC Model


... Goodman Manufacturing Goodman Variable Speed Air Handler With Flowrator 3 to 5 Ton. AVPTC Model

Hello everyone, I need a little help with a Goodman Air Handler speed setting. I have the manual and it explains pretty clear how to set up the dip switches for a certain speed. I tried lower settings than the default but it does not change the speed at all. I believe that is set for the highest setting and I want to set it lower. This air handler has the variable speed motor. It's a 5 ton unit but I don't think that it matters. Please respond if you know how to do it? Thanks a million.


If you have the manual, in there it will tell you what color is what speed on the blower motor. Then you should have a wire on heat h, a wire on cool h, and two wires on park terminals. Say Red is medium/lo, and you want that fan speed set for the he ... Air Conditioners

Evaporator Coil I have a Goodman A/C system (2 systems...1 for 1st floor, 1 for 2nd floor). The one for downstairs is 3.5 ton. the one for 2nd floor is 3 ton unit. Installed when house was built 5 1/2 years ago. The upstairs unit has had the evap coil replaced once, and repaired a leak once - 6 months ago. The downstairs unit has had the evap coil replaced twice -and is now leaking again. Model for the air handler is ARUF042-00A-1A. Goodman part# for the coil is P140142. Can I replace this coil


Yes, just count how many pins per inch and replace with the same number of pins per inch. ... Air Conditioners

How do I decipher air handler model # AWUF240516BA, serial #1002617593? Condensor model # GSZ130241AB, serial #1003505321? Sticker on equipment says Goodman. I am curious as to year manufactured, size, seer rating, etc. Thank you!


... Goodman Air Conditioners

Carrier air handler model FV4CNF003 3ton variable speed motor


... Air Conditioners

The model number as listed on the receipt is CKQ24. The Blower moter in the air-handler is not running. When the fan-only switch is turned on, the blower motor will attempt to spin by pulsing for about 2 seconds. It will repeat the pulsing cycle in about 2 second intervals. There is no smell of burning. When the unit is set to AC and auto, the evaparator coils do chill. The blower motor is a variable speed motor with an external ECM. How do I test the ECM and/or motor? What should I look for in


Personally I would get an exact replacement capacitor same voltage rating and microfarud rating. The capacitor will read something like 370v 5uf. I would be surprised if that's not the whole problem. If not it needs an exact evaporative fan replaceme ... Goodman CKL24AR24 Air Conditioner

I have a goodman 5 ton a/c model gsc130601bc, it isn't cooling, keeps tripping main 60 amp breaker, blower is running at air handler. Tstat is calling for cool and contactor Is pulled in, it has a service breaker close to unit. I checked 80/5mfd capacitor with field meter, checks 79.5/4.9 mfd


... Air Conditioners

Hello, my HVAC is constantly freezing, even after freon is added. I was told that I have a leak in the coils and need to chance the air handler - the outside unit is about 10 years old - air handler about 18 years old. I would like to get only the air handler for my R22 outside condensing unit. My question is if in the future can I use this same 3.5 ton air handler with a new 410 condensing unit once my outside unit needs to be replaced. In other words can a Goodman air handler be used firs


I'm new at this and I can't tell how old the post is but I'll contribute anyway.You probably have fixed the problem by now. I wonder what part of the system is freezing up. I don't have a lot of experience but I know you can get frost where there ... Goodman CKL42AR42 Air Conditioner

Dear Sir/Madam, I have a 12 years old Goodman split AC. Recently the blower in the air handler was not starting sometimes. I changed the capacitor, but the problem is still there. I guess that the fan relay switch may be bad. Where can I find the fan relay switch for Goodman center AC? The model no for air handler is AW24-05c, the serial no is 9904464660. You help will be much appreciated. Thanks, Sherman


... Goodman Air Conditioners

I have a E2EB-017HA air handler and I want to change it to a variable speed motor. Is this possible


Some companies do sell a variable speed kit. It includes the motor and controls. Get your model and serial number of your unit and contact your local Payne dealer. The can locate the proper kit if available for you. ... Intertherm E3EB-017H Furnace 17Kw 2

I have a Goodman 2.0 model no. ck24-1B and would like to change it to a 2.5 Ton 13 SEER R-410A Air Conditioning Condensing Unit. My furnace is a Goodman model # GMS8, GDS8 or GHS8 are they compatible


If it is a 410a system now you would have to change orfice. if its a r22 system now no way. ... Goodman Air Conditioners

I have a 4-ton Frigidfaire air conditioning unit on my 2400 square foot home, but I am not receiving the cooling I should receive. My split system model is #: FT4BF-048K. My air handlers Model is #:B4VM-X48K-C. I suspect my problem may be duct size. What should be the sizes of supply and return ducts on this unit? Phone 941-776-9270.


Hi, the ducts are 18" round at the beginning and branch out to smaller sizes for other rooms. 10" for living areas, 8" for bedroom, down to 6" for bathrooms if they have them.If this unit was just installed, I would recommend getting the contractor o ... Frigidaire Air Conditioners

Hi,I am really hoping to find someone to help me if possible. I have a one year old carrier infinity 4ton 17seer condenser and a 5ton variable speed air handler. I has worked fine but now i am getting a SYSTEM MALFUNCTION on the thermistat. When this message appears the air handler continues to blow and only the fan on the condenser continues to run but NOT the compressor so it is not cooling. At times it begins cooling again but then later stops cooling and shows the same malfunstion message. I


Hi,\015\012If this si what I am thinking it is, it will be very hard to find and prove.... \015\012The compressor windings have aflat spot and if the motor stops at the right place it will not atart. The voltage goes way up and kicks out ... Air Conditioners

GOODMAN AIR HANDLER MODEL CA*F4961*6A*+MBE2000**-1 HAS HEAVY CONDENSATION IN THE TOP OF THE UNIT WHERE THE ELECTRICAL /CIRCUIT BOARD IS LOCATED.THE UNIT IS LESS THAN ONE WEEK OLD. THE COMPANY THAT INSTALLED IT HAS CHANGED THE DIP SWITCH SETTINGS AND TODAY PUT IN LARGER COLD AIR RETURN DUCTS.STILL IS THE SAME.ALSO THE COILS UNDERNEATH HAVE HEAVY CONDENSATION ON THE BOTTOM OF THEM.WHY CANT THEY FIX THIS ONE WEEK OLD UNIT.THE OUTSIDE MODEL# IS SSZ140601A*THE HOUSE IS 2480 SQ FT. THE OUTSIDE UNIT IS


This is not even a repair issue.If it is hot out and it's on quite a bit,there will be much condensation.However,condensation on a circuit board is never good.Since it is only 1 week old and you can see this serious of a potential problem,especially ... Goodman Air Conditioners

Not hot air - Goodman Manufacturing Goodman ARUF182416 Air Handler, Multi-Position, Direct-Drive,


One of three issues\012Thermostat not wired properly\012failed heat sequencer in air handler\012bad heat element in air handler ... Goodman Manufacturing Goodman ARUF182416 Air Handler, Multi-Position, Direct-Drive,

My son has a Goodman Manufacturer Corp Heat Pump/air conditioner. Forced air I believe. The air conditioner quit. A repairman indicated that in order to replace the air conditioner the furnace will have to be replaced also. The air conditioner unit outside is Model No. CPE30-1-AB. Any thoughts?


I don't see any reason to change the furnace unless it's an air handler and not a furnace with a coil on top or bottom. And then, the only reason to change the inside unit when you change the outside unit is because it's a R-22 system and your going ... Goodman CKL30AR30 Air Conditioner

Details I have a problem with a Goodman Model GSH130601AA, ( 5 Ton, 13 Seer heat pump) central air unit, installed 06/15/2006. (I know, I saw online reviews but unit was put in before I saw negative e


The fan motor is bad and needs replaced. Depending on how mechanically inclined you are, you can replace it yourself fairly easy, the hardest part being the fan blade without a hub puller. Just take your old one in with you to a local A/C supply stor ... Air Conditioners

I s a ruud air hundler model no. compatible with 2.5 ton goodman


Yes it is definitely compatible. However the pump capacity is on the higher side of the range its capable off. You might be required to set up a bleed/safety such that when the pressure increases the air handler may just be able to keep up the supply ... Ruud Handle Air Conditioner

Central air only blows a small amount of cool air out the vents. After running 12 hours it only cooled my small 1BR apartment 3 degrees. The filter has not been replaced since October 2009 but I can't seem to get it out of it's little slot at the bottom of the unit. It's a Goodman Manufacturing Model Number ARUF024-00-1A. The air filter is loose but won't slide over the bottom metal lip. Is it okay to (a little aggressively) wiggle it out? Thank you so much!


I have a Goodman A/C unit APRF036-00B1. The out side unit seems to be sucking and bowing air, the coil is cool to the the touch and the blower seems to be turning. I've check what seems to be the obvious. A small amount of air is only coming out. Any ... Goodman CKL36AR36 Air Conditioner

1990 Goodman air conditioner model CE36-130 is it a 3 ton or a 2.5 ton unit?


3 ton 25 years is great service for a/c ... Goodman Air Conditioners

How many tons is a goodman model #CKL 49 -1 - Goodman Air Conditioners


... Goodman Air Conditioners

Heat pump drawing too many amps - Goodman Manufacturing Goodman GSH130301 Air Conditioner 2.5 Ton 13 SEER Heat Pump R22 - Dry Unit


If you are over drawing amps on start up and the breaker trips then you probably have a locked or"sticky compressor. You can check this by looking at the sticker on the compressor it will have a rating called LRA(locked rotor amps). If it your amp dr ... Goodman Manufacturing Goodman GSH130301 Air Conditioner 2.5 Ton 13 SEER Heat Pump R22 - Dry Unit

I have a Goodman air handler Model# PHJ042-1B Goodman unit- --------------------- R G Or Br W Y B Tstat (present wired in unit R G Blu W Y Present Hunter stat wires wire --- G Blu R Y W stat connectors G Rc Rh Y W (Rc & Rh have jumper) How do I wire new stat a pro 5000 2 heat a cool w/ 18/8 wire and have it work correctly and have the compessor reverse valve work. Pro 5000 stat reads Top


... Air Conditioners

Could any one tell me how old this Bryant air handler model fa4anf030 is and this Bryant Outside compressor / heat pump model s3ba-018ka (1.5 Ton)


... Air Conditioners

We installed a 4 ton downflow coleman air handler with evap coil Model number 1854s2m we did not change out the outside unit. the outside unit is a 13 year old 3 1/2 ton intertherm condenser the system is only generating a 10 degree delta T. My question is, this coil came with a factory TXV I am trying to find out is this a 10 seer or 13 seer coil is it compatable with the outside unit.


You have a missmatched system, for it to work try removing the orfice on the high side txv it is not allowing the evaperator coil to fill with refrigerant properly coleman and intertherm dont like each other since they control a large market in the ... Air Conditioners

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || ad-trader.net || Terms of Use || Contact || Privacy Policy
Load time: 0.1676 seconds