Having problems with your Air Conditioners ?

Bonaire Integra - fan only works in boost mode

\015 This evaporative cooler's fan uses the Comfort Control remote and does not adjust speed in Economy mode anymore. Only works on Low setting or on high in Boost mode. Low setting is useless in the hot months and high\015

Answers :

Repair Help & Product Troubleshooting for Air Conditioners
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Bonaire Integra - fan only works in boost mode


... Mastercool Air Conditioners

Bonaire Integra - fan only works in boost mode


... Mastercool Air Conditioners

I have a bonaire VSL75 evap. Fan only working on low speed, on all speed setting except for boost (then fan runs at boost).Has a climate technologies touch pad control.


... Air Conditioners

My bonaire evaporative cooler cycles from high to low fan speeds when set in the cool mode. It works fine at the required speed setting when just the fan (no water) is selected. It also dumps water immediatly the cooling cycle is turned off rather than holding it for about 40Min as it should. Sounds like a controller problem, but I'm not sure if it would be the touch pad or the board up on the roof mounted unit.


... Air Conditioners

Hi i recently purchased a used convair portable supacool 9 air conditioner the first time i switched it on it appeared to work ok but the next time i turned it on it is working on normal fan mode but when i turn it to air conditioner mode it is doing exactly the same as on normal fan mode the compressor does not appear to be working and is not making the extra noise that it was the first time i have tryed all the switchs including the thermostat but there is only a very simple to use set up any


... Convair Portable Air Conditioner

My fan stopped working, but i hear the refrigeration unit working. is there something i can do to fix this? i cleaned out the filter, that didnt do anything to the issue. when i have it set to just fan mode, nothing works. but when i set it to high AC i can hear the ac unit working but no fan movment, so im assuming its the fan that is the issue.


Yes , you may have to change your fan and it should work . seems your fan went up on your a/c .. ... Haier HWC05XCB Air Conditioner

I have a carrier Modle No. 38YXA042300. I am getting an H5 error message on my Thermistat Control. I have run the Fan only mode and the fan in the air handler unit works fine. On the unit when I ingage the manual override, the condener unit and fan motor runs and cools. The unit will not run when I put the Thermidistat on Cool mode. Can you help me. Andrew Construction Mangement Speicalthes, Inc.


On some carriers they have a lock out feature outside to reset shut down power to furnace for 90secs. and then restart ... Air Conditioners

Amana PTAC Unit is not producing heat. Fan works fine. can not locate manual reset for heat although a label on the unit says there is one. I have an Amana pth153b35ae ptac unit that the heat will not come on. The compressor will run in the cooling mode but not in heat mode. I verified the switching valve is working and the capacitor seems to be fine as the compressor will run in cooling mode. The thermostats seem to be functional because relays can be heard clearly when changing temperature se


I know this is late but I had to add a solution to this problem since I had the exact same problem and was able to solve it. The probelm is not your control board. On these units, the heat pump compressor will not kick in unless the temperature you ... Amana PTH123B25AJ Heat Pump Air Conditioner

My hotpoint eg900x fan oven has a problem. the fan oven no longer heats up, fan is working but no heat. oven works in normal mode


... Air Conditioners

I have LG Art Cool LSP 122A problem is after turning on works for 5 min. and compressor cuts out and won't turn back on again , indor fan still runnig. After pressing operation mode selection button and skipping operation mode compressor will start again but work only 5 min .


... LG Air Conditioners

My air conditioner stops cooling. Occasionally, it will just function on fan mode even though I confirm that it is on cool mode. Warm air comes out even on the absolute coldest setting. I have to turn it off and use the manual reset button on the plug to get it to work properly. The problem started after the unit iced up one night and it hasn't worked right since. Is there any way to fix this or am I gonna have to get a new AC?


If after reset the A/C cools then the fault seems related to the thermostat or the cut off pressure switch or load cut off.\012However is there is no cooling at all the compressor and the gas pressure- check for leak if gas is absent.- must be ... LG ZW6500R Air Conditioner

Pace Air 24HPEW-HEC Unit will not heat, though heat mode comes on, dehumidify and cool mode work, and fan works as advertised. Fault Code E4 presents at startup. Manual is off site. What is this code telling me?


If unit displays "e4"1? Check whether the winding resistance andoperation current of the compressor are normal.2?Check whether the high and low pressure is normalwhen the unit is running.3?Check (whether the ... Pace 12ACXWHEC Split System Air Conditioner

Fan does not come this seems but the compresser will. this seems to happen afer the unit has been on for approximently a half hour. when i did the test on the board everything worked except the fan modes. yet it works sometimes but fails the test. help me please.


Hi,\012The fan realy on the board is going bad... unfortunately you will have to replace the whole board...\012\012heatman101 ... Air Conditioners

Window Unit - Fan does not come on in high & medium cool modes, works fine in low cool, fan also works


Fan motor speed control on the motor itself is out.. Replacement is only option. Good Luck\015\012\015\012Dave ... Air Conditioners

Everstar mpk10cr grinding compressor I think.... Fan works fine, will kick into cool mode (elevated fan level) for a few seconds then it sounds like the compressor has a loose mount or something... sometimes it rattles for a few minutes (and cools) but sometimes it shuts the rattling off as fast as it starts and doesnt really ''cool'' or dehumidify.... Some days its works fine all day, others it just never really gets its ''**** together'' so to speak... Can users recharge the coolant themselve


Hi, I hear you , you have to keep her happy and cool!! First of all, no you can't buy R-22 unless you are a contractor and you have a certification card showing you are qualified to use freon. This is not your problem from what you are saying. If thi ... Air Conditioners

I have a Noma/ DeLonghi portable air conditioner. 3 Modes-fan-dehumidify-air conditioner.When I try the Dehumidify or air conditioner mode the mchine strains to start up and then blows a fuse. Fan still works fine.Tia


Compressor is not starting, it could be a bad or shorted run capacitor, start capacitor and relay, low voltage, loose or disconnected wire or a shorted compressor. ... Air Conditioners

The fan speed in my mini split a/c indoor unit is abnormaly low even when set in High speed mode. This unit also has a powerful mode to raise the speed beyond High for 15 minutes, but it is not working either. I replaced the fan motor, the power supply board and the main board to no avail. Any help will be appreciated.


Please change the fan capacitor,all will be ok afterwards. ... Air Conditioners

My fan will run but the compressor will not turn on. It was working fine until it was switched from fan mode to cool mode.


Unfortunately, typically this means low freon charge. Need to have a tech charge the system. ... Fedders A6X05F2D Air Conditioner

Fujitsu inverter ASTA24LCC aircon wont work on heat mode. Two flashes of red and green lights, followed by five flashes of red light and sequence continues with a pause between. Other modes, fan, cool etc work.


Check that the gas is not leaking, that would be the most likely cause. ... Fujitsu Air Conditioners

I have a AZ38H15DADM1 that works fine in heat mode and in AC mode it works great until it reaches the temp it thinks it should be, then it cuts off and never cuts back on without me physically turning the knob to the fan for a minute or so and then switching it back to AC. Any suggestions??


... GE Zoneline AZ38H12DAD Split System Air Conditioner

Hello, I have two Yokohama Split type air conditioners that work fine for cooling, but when switched to heat they just blow air at room temperature and then after about 1 minute go into a standby mode indefinately. They work perfectly for cooling. All fans work perfectly and the compressor works perfectly for cooling. Thanks...


... Air Conditioners

My Ruud heat pump fan stops after running a minute. It is 10 degrees out now and defrost mode seems to work fine. It makes a humming sound when the fan gets stuck. Sometimes if I take a ruler to it, it will unstick and starts spinning but not other times. cover over the fan motor feels very warm, almost hot to the hand. I've shut it off totally for now.


Hi,The capacitor for the fan motor is bad...replace the capacitor and you'll be good to go...\012Here is a tip about troubleshooting your air conditioner...\012There are many things t ... Ruud UBHC Air Conditioner

My wa1200 works only as a fan. air condition mode doesnt work, it shows all the images it shou like falling snow flakes and the word "COOL" but then it also says "E4". what does that mean and how do i get it to work?


Hello,The e4 is an error code signifying there is a connection problem in the air conditioner.It simply means there is a malfunction in the system and that is why it is not getting cold.Check the compressor of the ... Sunpentown Air Conditioners

GOODMAN CMA80905CXBA FURNACE. INDUCTION BLOWER NOT ENERGIZING. GETTING 3 "BLINKS" FROM DIAGNOSTIC LIGHT (LOW PRESSURE SWITCH OPEN). THE A/C WORKS & THE BLOWER FAN COMES ON WHEN THE STAT IS IN THE HEAT MODE WITH THE FAN SWITCH ON. WHILE THE FAN IS ON , THE DIAGNOSTIC LED STILL BLINKS A CODE OF 3. THIS IS NOT A CONDENSING FURNACE. I BYPASSED THE STAT (W & R)TWISTED TOGETHER---SAME RESULT---DIAG LED COMES ON STEADY, THEN FOUR CLICKS, AND BACK TO THE CODE OF 3 BLINKS. CIRCUIT BOARD???? OR 120VAC NOT


The pressure switch is closed before the draft motor closes it.the board is telling you that this is not right.pull the wire(either) off of the pressure switch to see if furnace tries to light.if it does,you should replace the pressure switch. ... Goodman Air Conditioners

GE Zoneline HP PTAC A3B688DAALW1 WIRING DIAGRAM? Found a 6" L white wire with 1/4"F stake-ons loose from center terminal of Compressor capacitor 20/5uf going into the back wiring compartment. Not sure where it came loose from. There is a black multi stake-on terminal block up inside behind the capacitors. Attached it there to a unused spade but now fan does not run the indoor fan when in heat mode (compressor or elect. heat). Before the fan and electric heat worked but compressor just buzzed try


... GE Zoneline AZ55H07D Air Conditioner

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || ad-trader.net || Terms of Use || Contact || Privacy Policy
Load time: 0.1127 seconds