Having problems with your Air Conditioners ?

Our Ptac is set on 90 degrees and blows out nothing but cold air; once in a while FP displays on digital reader. How can we fix this ongoing issue?

Answers :

Repair Help & Product Troubleshooting for Air Conditioners
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Our Ptac is set on 90 degrees and blows out nothing but cold air; once in a while FP displays on digital reader. How can we fix this ongoing issue?

... Amana Air Conditioners

I just purchased a pelonis digital fan forced heater model number hf-0063 and took it out of the box. i plugged it in and it immediately began loudly beeping and had an error message "E2" blink on the display. i cannot turn the machine on as the error message blinks non-stop. there is nothing in the owners manual regarding the error messgae E2. how can i fix this issue?

... Air Conditioners

What is the error code EP on a GE window air conditioner? This air conditioner stops cooling and displays the error code EP......we have moved controls, checked breakers, checked plug, checked trip and reset on plug.......then sometimes it will display digital temp and start cooling again only to cut off cooling in a few minutes, few hours or it may run all day before displaying EP again....

Hi\015\012\015\012Unplug the machine and plugin after that push the reset button…Hope the machine will work.\015\012\015\012Let us know if you have something more to know else please accept the suggestion.\015\012 ... GE AGW18DH Electronic Room Air Conditioner

Haier - hsu 12cvy03 air conditioner error code e4 , Air con unit comes up with a E4 code on the digital display , no air comes out of the unit, can anyone help and anwser my problem. many thanks matt

... Air Conditioners

I have a GE room air conditioner and the digital display that normally shows the room temp now has two letters EP and the air conditioner does not cool. What does the EP stand for and how do I get it back to normal.

Following are error display codes for GE airconditioner:---Display Codes:E1 or EP error:---- Automatic filter clean reminder.Turn the air conditioner OFF and unplug it. NOTE: The air conditioner ... Air Conditioners

I have a split system air conditioner that spews water whenever we turn it on. How would we go about fixing this issue? Seems the drainage isn't working right. The air conditioner is a Fujitsu.

Wwwwwww ... Air Conditioners

The PAC-260 runs for a few minutes, then I hear the compressor stop and it spews hot air. Pressing the reset button fixes the issue only to have it be reset again after a few minutes. Air filter is fine, the tubes are setup properly (ie. it is a straight run up and into the window). What am I missing, the reset button is supposed to be used when I figure out what is wrong, but I know it works (sort of) because when it works it still is very cold.

I had exactly the same problem. After some diagnosis I discovered that the water pump was not engaging so I checked the float switch, it was fine. \012\012A press of the red reset button turned the compressor back on for a few minutes but the ... DeLonghi Pinguino PAC-260 Air Conditioner

I have a Haier ESA3067 air conditioner that has worked fine for a couple years. Then it began to have trouble responding to the pushbuttons to raise and lower temp, etc. Now it has stopped running altogether. When the unit is first plugged in, the display lights up "88" for a few seconds, then goes dark. If the GFI on the cord is tripped and reset, the display stays dark. It will not respond to pressing the on/off button. Can the problem be fixed by replacing the touchpad? Or is there ano

Yes, rightly said that it is the main controller unit that hass failed . It will worth a try to remove the board and reset the touch pads once again after resolderring on the connecctions of the microprocessor and the connectors to the display. ... Haier ESA3067 Air Conditioner

Blows cold air when heat is on. I just cleaned the filter and reset the button on the surge protector. Digital display and blower both work fine, but makes no hot air when the heat is on



... Fujitsu Air Conditioners

I have a DeLonghi air conditioner model # PAC A110L that is leaking water from the bottom of it. I lost the manual (ofcourse) and I need to know who to fix this issue. THanks! :)

Its condensation,which is normal,try tilting the unit back a little so that the water can get to the drain hole in the back of unit. ... Air Conditioners

Conia 18003 air conditioner not working and displaying E3 message, what do i do to fix this?

... Conia Air Conditioners

My Carrier 21000 BTU air conditioner (model YCB213E built in 1996) has always worked perfectly until yesterday. When I pushed the red button to turn it on - nothing happened. The digital screen shows the letters PF but not the words that usually appear. Since I cannot find the owners manual, I am currently clueless. I would like to be able to fix it myself if possible since it weighs a ton and would be a real pain to remove and take to a repair shop. Any advice at all on where to start

... Carrier YCB213D Air Conditioner

Hi All, I have a carrier reverse cycle airconditioning unit and about a week ago the digital thermostat blanked out. I spoke to an aircon repair tech and he suggested that the fuse is blown at the air handler and suggested that I can probably replace the fuse myself. My question is where is this fuse located in the carrier units, do I have to open panels or is it in a box like a fuse box in a car. I have no issues checking the fuse if I know where to find it LOL, The model of the unit is

It will be inside the unit main panel. Turn main power off and remove the main front panel. The fuse will be located on or near the fan control board. Typically they are a flat agc type fuse. 3-5 amps. The problem will be that if the fuse is blown ... Air Conditioners

Could you please help me. Last night my Brivis evaporative cooling system didn't seem to be working very well (ie not cooling properly). I left the airconditioner on overnight and when I got up this morning there is no display on the controller and I can't turn it on. Is this an electrical problem or an issue with the airconditioner. Can I fix it myself? Thanks.

You gave us good clues to help you figure this out-- THANKS!So-- you have an evaporative AC ! Great! -- (I assume you are in a very DRY area?-- For those type of AC units don't work well here in the North East!)However-- ... Air Conditioners

FUJITSU Air Conditioner Model AST24RGB-W is unable to switch on. Have checked safety switch and fuse on home circuit board and is OK. Power conected to outside unit is on and OK. Remote control has new batteries and display OK. Cleaned remote sensor panels on both remote and wall unit. ISSUE: When pressing the Start/Stop button the signal doesn't seem to be received by the wall unit. There is also no operation light on the Wall Unit. Unit does not turn on

What about the inside unit does it have power going to it. i would check the breaker for the inside unit. ... Air Conditioners

My Haier 8,000 BTU air conditioner is showing an 'E1' in the digital display. It won't turn on. What is the problem?

I had that same problem, find the remote and use that to turn it on / off. It solved the problem for me, for whatever reason. You will need to use the remote until the buttons start working again, took mine a few days. I have no idea what was wrong w ... Haier Air Conditioners

Kelvinator split- type room air conditioner not working and has E9 on digital display what is happening

E-9 means high or low pressure. Please service your unit and then check. May be sometime problem would have solved. If not, check fan speed. If less rpm change new capacitor. Thanks. ... Air Conditioners

Ge ac asm12acs1 randomly increases the temperature on the digital display by itself and starts blowing hot air

... GE Air Conditioners

I have an a / c split lg inverter c18aw "damaged, displayed" ch46 "and the air conditioning is completely stopped. I need to fix this.

Hello, the problem of your air condition can be view from three section 1)from the compressor 2) carpers-tor 3) and also from the control switch it self these three item can be the cost of the problem because there wor ... Air Conditioners

My danby silhoulette modol dpac120060 fills with water and must be emptied 3-4 times a day, very inconvenient, what can I do to fix this??? ( it has worked for half the summer with no issues and now will blow cold air for approx 5 hrs and must be emptied )

... Danby Portable Air Conditioner

Haier hwr08xc7 air conditioner says E1 on the digital display????

Try washing out out side coil. Check voltage when unit is running. If condencer is plugged with dirt it will cause it to overheat. Also if it will run at night when its cooler outside the load maybe too great during the heat of day to cool down and m ... Haier HWR08XC7 Air Conditioner

I have a Samsung RS21DPSM side by side fridge under 2 years old and the other day a loud noise was coming from fridge Sounds like a fan as when you open fridge door it grinds to a stop) compartment and cannot get fridge temperature to go below 12 degrees on the digital display. Freezer compartment seems fine and cold and holding its set temperature! Can this be fixed without calling someone out?

There is a design problem with this model. The fridge section is icing over due to a design defect and the noise you can hear is due to the fan on the motor driving against the ice. Eventually the motor will be stopped from running and the fuse will ... Air Conditioners

When i plug in my Everstar Freestanding AC Unit model MPM-08CR-BB4 into the wall, it turns on and then after 1 second stops blowing air and displays "P1" while the icon on the top right blinks with a red light. How do I fix this?

Check sensor ... Everstar Air Conditioners

I have a unit that it is blowing out cold air when have it on heat. I have had issues in the past where the heat stop working. I had the part fixed and now i have no heat again. Where i live it is 11 degrees and it not planning to get warmer no time soon. I need some advise asap because i had a tech come out to look at it and they are stating that the gas valve is receiving the correct amount of voltage but it is not opening and suspecting a cracked heat exchanger which all this sounds famil

Check power goes to heating coil by a volt metre. I think, it's better to calla repairman to repair/replace the heating sensor or heating element. ... Air Conditioners

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || ad-trader.net || Terms of Use || Contact || Privacy Policy
Load time: 0.1081 seconds