Having problems with your Air Conditioners ?

I have a AMANA PTh153B50AE (PTAC unit). The air conditioner works fine. It is when I turn on my heater and it does not get warm. It just blows cold air. I have looked at the board and it appears that there are no bad spots on the board from where it had burnt. It appears that it may have a manual heater reset button. I am not sure if that will work but I can;t find the reset button. I am wondering if my heat pump has gone bad. Any help would be appreciated. Thank you.


Answers :

I have the same problem, and I found the manual reset inside the unit. Turn the power off, and unplug the unit. Remove the outer cover of the unit ( inside cover ) , and remove the 2 screws holding the " wire mesh " in the front of the cover. Pull the wire mesh up and out of the way, then carefully pull out the heating element.
On the heating element, where the wires are connected, there is a manual reset button... Push the button in, till it resets...

My reset was on the upper left connection of the wires... just looks like a small push button, but the reset is recessed a bit.
Replace all covers and plug back in.. working fine..

Repair Help & Product Troubleshooting for Air Conditioners
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have a AMANA PTh153B50AE (PTAC unit). The air conditioner works fine. It is when I turn on my heater and it does not get warm. It just blows cold air. I have looked at the board and it appears that there are no bad spots on the board from where it had burnt. It appears that it may have a manual heater reset button. I am not sure if that will work but I can;t find the reset button. I am wondering if my heat pump has gone bad. Any help would be appreciated. Thank you.


I have the same problem, and I found the manual reset inside the unit. Turn the power off, and unplug the unit. Remove the outer cover of the unit ( inside cover ) , and remove the 2 screws holding the " wire mesh " in the front of the cover. Pul ... Amana PTH153B50AE Air Conditioner

I have a GE PTAC I have been working on. Our units are run by a wireless wall thermostat which sure doesnt help matters. Anyway at first I had nothing then got power lighting up on the circuit boards for the wireless. No power going to either the heater or the compressor. Changed out a couple circuit boards from spare parts and got power going to those now but still doesnt operate. I've checked the transformer and the capacitor. Checked the fuse and changed out thermister. Nothing. Any ideas


... GE Zoneline Deluxe Series Cooling & Electric Heat Unit AZ25E07D3B

I have a goodwin ar36-1 central electric ac/heater that nothing is turning on at all. I checked the brerakrs but they are all on. i can not find any recet buttons or fuses on either the inside unit or outside unit. Is there a reset button or fuse for me to check on this unit? we were out of town for a couple days and the front door blew open.....so i am sure the heater was constantly running before the system comp-letely shut down. any help would be greatly appreciated! craig


Lol they usually don not have a true fuse in the disconnect box but a plug with a t handle that you pull out and flip over to disconnect the electricity and reverse to connect it. ... Goodman CLQ36AR49 Air Conditioner

Heater stopped working. Fan works, control panel diagnostic check reports no failure code. Placard on front of unit says heater unit has manual reset, I can't find a reset button or breaker for heater. Help?


The front panel should be held in place by four screw at the corners or snap in place. Either remove screws or pull gently on top right corner to remove cover. You should see a red reset buttom type reset. Push it in to reset. Hope this helps. Thanks ... Amana PTC123D50AR Air Conditioner

I have a Fridaire AC window unit about 3 mos old. It just would not work with the buttons, then we unplugged it to reset it, and now it will just beep when we plug it back up and push reset, then it turns off and will not come on at all. It looks like from the side the model number is: FAA087(5 or maybe a S )A ....I have called the number on it, and I get recordings and then to call a LONG distance number and no one to help. That was Thurs and we sure are hot!!! Can you help???


How long do you leave it unplugged for? try a couple of hours to let any memory voltage dissipate and clear memory, then retry, also does it have any troubleshooting ideas in the owners manual, possibly a certain way of steps to un glitch unit and ma ... Air Conditioners

Honeywell central AC/heat Electronic fan timer st9103a 1036. Honeywell is no help. They want me to buy a new board for 150$. I believe its the IC on the board that's bad. I have not been able to find a schematic of this board. The IC is labeled: L 9948 814 (large dot) Y I've tried a few on line part suppliers and they cant identify it. It has four pins. Home was hit by lightning and it fried 3 items on 3 different house circuits One was the AC. The above board is telling the fan and the heater t


... Air Conditioners

My ruud gas heater, i had to purchase a new relay board mod.#st9101a 1014 becausemy blower would not come on when heat is called for. now I do not have any idea of how the thermostat wires onto the board. I have a 4 wire cable coming from the thermostat and a 2 wire cable coming from somewhere else. when i hook up just the 4 wire cable ,the blower relay just chatters and not enough current to start the blower please help me hook up this board


Wires R, G, W, and Y, go to the marked terminals. The other 2 wires are for your out door unit, the red will go to red, and the other which should be white will go to the yellow also. R is 24 volts hot, W is for heat, Green is for the fan, and yellow ... Ruud Air Conditioners

I have both Heater and Evaporative cooler fitted to my house early this year. When I turn on the cooler with the Comfort control remote, air coming from heater outlets but not from the cooler outlets. Have recode,reset the unit. It only stopped the air coming from heater outlets.No air from cooler but could hear a pump like thing next to the fan running.Please help.


Mate .. stop playing with it if you dont know what your doin honestly... sounds like you could end up costing yourself more money. it will b under warrenty call back the installer ... Mastercool 67471 Evaporative Cooler Air Conditioner

HELP......! Have a gas furnace . It doesn't say what it is.... I believe it is a coleman, or intertherm the model number is DGAT070BDC serial # is 940465330 that is the only information it has on it. Someone apartly tried to make it work, and all of the wiring is undone or gone...board is gone. and I am not sure what else.... Is there a way you can get the wiring scamatics for me.... and possibly a listing of what parts should be in it.... Please help! let me know...at: jarvissonsinc.att.net If


You might try a Coleman or Intertherm dealer in your area, they should be able to help you or maybe go online to those companies. ... Carrier 36KCARMS Air Conditioner

Cycleing, ok it sound like the heater fan kicks on then off , on then off, on then off, just like that . it will do this on heat cold or in off post. the ac and heat seam to work but i dont get the on off cycleing ! its not the ac blower but like a fent fan for the heater ! had a ac tech tell me it may be my main bord! carrier modle # 58RA (VJU one of these is next not sure witch)050 board # HK42FZ009 S/N 3197A13382


You are referring to the inducer motor that is kicking on and off. It is probably a limit switch that might be triggering it to go off and on over and over. It could possibly be the board but I highly doubt it since the ac works just fine. It can ... Carrier Air Conditioners

Edenpure heaters. replacing some parts, got interupted, not sure where a couple of wires go on the xl1000 heater. could you help? Thanks Wayne


... Air Conditioners

After experiencing a power outage in our home, our LG Heater Unit stopped working, there is a blinking code displyed CH 24. I've shut off power to the unit several times, units appears to reset for 10 minutes then the shuts down and the blinking code appears again. I've tried letting the power of all night the issue is still present. Any suggestions. Thanks


... LG Air Conditioners

I have a 20 year old honeywell quartz air/heating control. I'm not really sure how to use the heater. It has two separate toggles at the top (one blue and one red), a button that you push "up" at the bottom, which appears to turn this dial inside to either red or blue, a clock thing that doesn't work, or at least appears to do nothing. The air comes out warm for a bit, and then goes cold.


The Blue knob is for cooling the red for heating. I would reccomend replacing it due to the fact the age and it probably has yrs of dust built up on the mercury bulbs which can throw the tempurature off. Dust on these old mecury style thermostats i ... Air Conditioners

Heater will not start, needs resetting but have not got technical booklet. last year had new board fitted. wife has fitted dust covers over ducts and blocked flow. have removed covers but need to know how to reset


Can you give me the brand and the exact model number of your appliance so that I could further assist you?\015\012\015\012I will wait to hear from you. Have a great day ahead! ... Air Conditioners

Hi We have a GIANT waterheater 60gal 4500watt 94-12 Problem: The water heater doesn't heat up anymore since about 24hrs. It's not the breaker we checked that. AND if we would like to RESET with the reset button it doesn't work either. Thanks for your help.


Hi,\012Yes, the reset probably is tripped...push in the red button hard Then turn it on and try it...Check out this tip..How to replace the Thermostat and Element for ... Air Conditioners

Heater will not work, trips the reset button constantly. No help from manufacturer.


First of all I would make sure that you have it set up as instructed by the manufacturer guide or owners manual. If the plug is getting warm, replace the receptacle or try it in another outlet. Do not use an extension cord unless it is rated at the c ... Soleus 10,000-BTU Portable Air Conditioner with Dehumidifier/Heater - MAC10

My dimplex duoheat radiators keep clicking madly like they are stuck, i keep having to turn them off by the plug and turn them back on the next day. I don't think they are receiving the signal from the main control panel. It's never all 3 heaters together, just one or two at a time. This is now happening every day. I have been told a process to reset them but it is not working. Any help would be great!


... Air Conditioners

My 1 year old Amana portable air conditioner (model AP125HD) is not getting as cold as it should. My attempt at troubleshooting was to reset the unit, check to see that the options are properly set, be sure that the hose is properly attached and to ensure that the window base is secure and that all cracks and openings are sealed. I don't know what else to do. Please help.


Inside there is a filter attached to the motor. you will have to unscrew and open the unit to clean it off. it will be approximatly 6 to 8 screws to remove. i used a damp cloth to wipe the dust which was as thick as carpet(lol) cuz my unit is 4 years ... Amana Haier AP125HD Air Conditioner

Ihave a probllem with the front dometic A/C not starting it is coupled with front dometic lp gas heater with wall thermostat.(rear has identical) Switched waqllthermostats and power boards on heatersno start. there is 7.? amps on the red wire at the rear thermostat none at the front thermostat.and there is 120 volts st the front A/C ..I dont Know wher the 7.?amps at therm. is supplied from I hope you can help me get the front A/C working.remember when I turn the thermostat on nothing happens &


HiThere is a fuse inside the control panel of the AC itself. You have to \015\012take the cover off (from inside on the ceiling) and look up in there \015\012with a flashlight to find it. It is usually a very small amperage fuse. Maybe ... Dometic Rooftop RV Air Conditioner

My Danby air conditioner is getting error E03 and the blue light is flashing. It appears to be working fine other than that. Can you please tell me what this error means and how to fix it. Do you think it might help to unplug and reset the unit?


... Danby DPAC120068 Air Conditioner

My Goodman air handler RELAY, ELECTRONIC BLOWER TIME DELAY makes a clicking noise 4 or 5 five cycles (about 10+ Sec delay ) before the squirrel cage fan will come/stay on. I have reset the unit by switch it off for 5 minutes then back on and it worked for a week but now it makes the outside compressor go on and off the same number of cycles before it comes on. Do I need a new board or can the capacitor cause this problem? Help it's hot in Phoenix!


When this happens turn off power and feel motor if hot capicitor i dont think this board cost much but if it does you can get a fan sequenseing stack switch to repace the board with ... Air Conditioners

Looking for manuel reset on heater amana ptac unit heat won't come on new control board


I dont know about this model but in general electric heat wont have a reset button the heat is controled by a sequencer and each elememt has a safty limit switch incase the sequencer sticks in the on mode here is a link to where you can get more info ... Amana PTC153B35AJ Air Conditioner

Stadt J-90EI ducted heater sometime doesnt turn on. when reset sometime works other time a red light flashes 5 times which on the board says "Flame Det"


Stadt ducted heater wont ignite ... Air Conditioners

Problem with my Frigidare air condioner the model# is FAM156R1A. Not sure if the pc board needs to be replace? im unable to change any of the settings. I've reseted it and it dosen't fix the problem. Basically none the buttons are there work, but my ac still blows cool. its just stuck on the same everytime.


Yep sounds like the main control ic on the board is bad, replace it. ... Frigidaire FAM156R1A Wall/Window Air Conditioner

Burner not igniting. i followed the instructions behind access panel to restart the heater, but still not working. there is no heat. the circular thing is rotating and i can hear clicking sounds whenever i turn the power off and on again. i'm not sure how it works, but if there are suppose to be flames in burner, i'm not seeing any. please help. thanks


The burner should have flames in it when lit and the noise you refer to is an electronic ignitor. Check to see that it is about one quarter of an inch from the small pilot burner . These things produce a spark about 15000 degrees but when they start ... Air Conditioners

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || ad-trader.net || Terms of Use || Contact || Privacy Policy
Load time: 0.0813 seconds