Having problems with your Air Conditioners ?

I have sabre 25 he plus combi boiler.There is a fault-the heating has stopped.The fault indicator is showing 08.Any help. george

Answers :

Repair Help & Product Troubleshooting for Air Conditioners
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have sabre 25 he plus combi boiler.There is a fault-the heating has stopped.The fault indicator is showing 08.Any help. george

... Air Conditioners

I have a Vitodens 100-W combi boiler with outside temperature compensator. My 'problem' is that the heating comes on outside of programmed times with the Vitotrol 100 Room Thermosat showing the 'Fallback' temp'. Turning the heating control on the boiler to zero does not switch off the heating. I noticed it today as i am home and it came on. How many other times has it done this as I cannot see how I am saving any money in heating costs if it going to come on when i'm not here! What do I nee

... Air Conditioners

Have a Remeha Advantage Plus combi boiler.Looked for instructions but unfortunately unable to find them.Tonight when i switched to minimum on the thermostat(which that normally turns off) the heating carried on pumping out.the only way i could turn the heating off was a the mains.........................which i probably shouldnt have done.

... Air Conditioners

My horstmann channel plus h17 central heating timer has three time settings. It is connected to a comby boiler. I can not seem to set the timer so it does not come on. I have to manually turn the boiler of every night so the heating won,t come on at 6 in the morning. I have tried to set the timer at on and of times for 6am the again the second timer is for 12 noon so i have set it to also go of at 12noon and again with the third setting it has 4pm so i set that for of at 4pm also. This does,nt

... Air Conditioners

I have a Ruud 80 plus furnace.....the pilot light went out. shows the temp on one side, when i put it past that temp for the heater to come on, it clicks, but no pilot light and no heat. how do i reset or light the pilot light?

... Air Conditioners

Have an ideal classic llff combi boiler,the problem is the central heating works,but i get no hot water on checking the pressure gauge it shows no-nil pressure on pressure clock can u advise ,can i refill pressure at at top of system where the pump is theres a valve for air was wondering can i pump the pressure up to 1.5 bar from their

... Air Conditioners

Have fixed previous problem I had with my Britony Combi SE but I now have a new problem. Boiler resets OK and all is showing as it should. However, as soon as I try the heating or hotwater the boiler fires up for about 15 seconds and then blows the trip switch on my fuse box. Any ideas.

Either too much current draw or breaker is to small. What size breaker do they recommend? What size do you have?If the breakers are sized right then there may be a problem with the heating circuit. ... Air Conditioners

I have a Vaillant Eco tec Plus 831 condensining combi boiler, the central heating works fine but not hot water comes out the taps. To be specific no water flows out of the hot water tap at all. Cold water flows ok from th cold tap.. Can anyone help. I thought it may be the diverter valve.

... Air Conditioners

Baxi Combi HE 133 Plus dry fire problem, no heating, pressure at 1.5 bars

... Air Conditioners

I have a potterton promax combi he plus showing error code e160. Dont have the manul to see what the problem is.

... Air Conditioners

Bosch Worcester R35HE plus combi boiler is showing a fault condition AE the condition returns after a reset. What does this code mean?

... Air Conditioners

I have a remeha advantage plus 35c combi boiler just want to know how to turn the heat up, i dont have a thermostat

... Air Conditioners

We have a vaillant combi boiler model 824 plus, it is hit and miss if it fires up for hot water.The pump runs the fan runs but no flame. when it doesnt fire the diagnostics on the front of the boiler show S13. Can you help

... Air Conditioners

I have a 6 year old Carrier Performance 38yza. Having a problem with heat. First no heat at all heat pump or AUX. Found AUX heat strip were grounded out and have now been replaced. Second no heat pump, Compressor comes on for only 1 to 2 minutes then shuts down. Service call yesterday Tech says no signal from Carrier Programable T-Stat, jumper heat pump, low freon adds. Says T-stat bad, but puts back together. Heat pump works blowing 90 plus degree from vent works great all afternoon and into ni

This sounds like you have a freon leak. Most units never lose freon. So that is one problem that needs to be addressed. Here is some more solutions for you: Other things that will cause or aggravate\015\012ice are clogged filters, bad fan moto ... Air Conditioners

We have a heil heat & air package unit with no heat pump and cannot get the thermostat to turn the heat off and on. We have replaced the thermostat twice and the sequencer twice and a relay once. You can bypass the thermostat and the fan and heat will come on but it won't go off by itself. We have not be able to find a schematic for this unit showing the heating side of the wiring. What can we do or what is the problem?

... Air Conditioners

We have a Worcester Bosch Highflow 400 (10 year old) combi boiler. Over the last few weeks when we have put on the heating the boiler kicks in and fires up and the heating comes on (the water comes on fine too) but the boiler keeps clicking off after a few minutes so the heating goes off (but the water seems to be still on). The radiators remain just slightly warm but we can't seem to get the boiler to stay on. Th heating and water lights are on and it sounds like it is working but the heating k

The by pass pipe may be limed up. This apparently causes a reduced flow which will stop the heating side of the thing working. Call out Worcester Bosch engineer. It costs £210 including VAT and most parts and they almost guarantee to get it wor ... Ruud Matching Split Air Conditioner

Heat... On low or high heat, the unit only heats for a few minutes then blows only cold air even with the temp turned all the way to heat. The status light on the board shows ok. Any ideas what to look for?

It sounds like the thermostat bulb has moved or the unit is getting an immediate air recirculation due to a partial blockage or air diversion close to the unit causing the warm air to get back to the thermostat bulb too soon, heating only a very smal ... Amana PTC153B35AE Air Conditioner

My Worcester combi boiler is working well for the central heating but only seems to heat the water when central heating is fired up, any ideas on what the problem might be?

Its the flow switch ... Air Conditioners

Not as much heat coming into house as was before,went to heater unit which has 2 60amp breakers on unit and while running turned off top breaker and came back upstairs but did not feel any difference in heat temp, went back to unit and turned off bottom breaker which turned of all heat plus blower motor. what is my problem?. thank you

First what type of heat do you have and if you can find the model # it would be helpful. Also if you have filters check them. ... Air Conditioners

Hi, I have a Halstead combi boiler. The Central Heating works OK, but we are not getting any hot water. It cycles between luke warm for a bit and then goes cold. Not sure if it's related but occasionally the heating also stops and this is due to the water pressure having dropped. Turning the pressure back up to 1.5 bar starts the central heating again, but does still not give us any hot water.

... Air Conditioners

Hi l am getting no heating or hot water from my boiler although it sounds as though it is on there is no fault code coming up the 'burner on and load indication' symbol - (15 on the control panel) does not show the 'central heating mode operation' symbol (13) above the 'central heating symbol' (14) is acting as it would if it was on. The boiler sounds like it is on but its isn't. There is enough gas and electric

Hi,\015\012 \015\012Please check the bellow article to have an in-depth idea related to your issue and check the probable causes to troubleshoot your problem that you have men ... Air Conditioners

Heater!!! Unit acts like its heating but there is no hot air. Fan turns on, heat symbol is showing on the remote, but no heat

I am experiencing a similar problem with my Mitsubishi slimline MSH09TW unit; about 4 years old; It use to give us very hot air now it is giving some what hot air; northeastern USA current temperature about 15F. You think frigid weather in Cranbury N ... Mitsubishi MS12TN Air Conditioner

I have 4 energy star thermostats installed in 2000. three are working fine. one does the following. when i set it for heat, the botton left of the window shows a flame, but not the word heat. by moving the temperature up, the heat does not go on.

What is the model number on the thermostat? ... Honeywell Air Conditioners

RTH7400 thermostat installed-screen display unlit-used page 10 wire installation. Used heat pump wiring-which does not show W2 and Y2 on heat pump schematic, so used conventional displayed W2 and Y2 connections. Have heat pump w/elec. furnace backup. Suggestions??

W2 and y2 are used for 2stage applicationsw2 = 2 stage heaty2= 2 stage coolIf your system is a single stage system, look for the y1 and y2 terminals. If the thermostat does not have y1 and y2 then you may have the wrong ... Air Conditioners

Installed a grant combi vortex 26e in January. Went back today to drain down and replace some radiator valves with leaking glands etc. When I filled and vented system, hot water fine, pump runs etc. Central heating will not fire although pump running. Pipework around boiler and by-pass very hot. No overheat. pump is free of air and spinning. I think in total I managed to get the burner to fire for on minute on central heating today. Confused. Could the by-pass be stealing all the heat? Could it

... Air Conditioners

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || ad-trader.net || Terms of Use || Contact || Privacy Policy
Load time: 0.0731 seconds