Having problems with your Air Conditioners ?

Need a schematic for a Fedders room AC/Heat unit model # AEY18F7E, S/N CR105425084Y 230/208v, 22.75 AMP. Power cord was removed. Have new power cord, just need to know proper wiring to existing terminal ends in unit. [email protected]


Answers :

One lead to L-1 and one lead to L-2 or "C" on capacitor depending on your model set up.

Repair Help & Product Troubleshooting for Air Conditioners
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Need a schematic for a Fedders room AC/Heat unit model # AEY18F7E, S/N CR105425084Y 230/208v, 22.75 AMP. Power cord was removed. Have new power cord, just need to know proper wiring to existing terminal ends in unit. [email protected]


One lead to L-1 and one lead to L-2 or "C" on capacitor depending on your model set up. ... Air Conditioners

My thermastate went out and i cant hook up the new one because it is not labled, and i need to know how i figure out what wires need to go to with letters (o/b, y, r, g, w). There is a plug with 10 wires ( there are colored ) that goes from the a/c unit to the thermostate, and seperate red and wite wires going to the thermostate. Also there was 12v power going to the other thermostat. The only thing the new thermostat has for hookups is o/b, y, r, g, w. can you help


Let me guess, you have a flat ribbon type harness coming from AC unit to thermostat, correct?Older Ac unit? What thermostat model came off, and what type are you trying to install? ... Dometic Rooftop RV Air Conditioner

I need a wiring diagram for a daewoo 5,150 btu window a/c unit made in 199 I don't have a model # or s/s # 115 volts I need to know where to hook up the power cord


Hello,I will advice you check the link below,http://www.retrevo.com/s/Daewoo-DWC-121C-Air-Conditioners-review-manual/id/12861ci965/t/1-2/Take care. ... Air Conditioners

I need a longer power cord for my A/C that's mounted in the wall. The one that's on it is too short and will not reach outlet? It was already like that when I bought this place.?? Can I make one? If so does the black wire or white wire plug into capacitor? The other goes to fan control switch. Since the original power cord wire isn't color coded I don't know which (black&white) goes to what. Thanks a million if you can help.


It will work either way since it uses alternating current and not DC ... Amana Comfort Zone 12M32PBEH Air Conditioner

Purchased new motor from Grainger motor has 4 wires 1 BLACK 2 BROWN 3 BOWN WHITE 4 YELLOW had to purchase new capasiter also for motor Old motor only had 3 wires 1 BLACK 2 BROWN 3 ORANGE Need to know how to connect the wires from the new motor to my unit and to the new capacitor ???


Grainger has great tech support,call them first,i would have to do the same to answer your question accuratly,im assuming it is the condenser fan motor,they will have all the correct info,if not i want to know,i was born and raised in minnesota and h ... Ruud Air Conditioners

My ac unit is making a humming sound I purchase a capactor an I replace the capactor I have a black black wires that is lose that and I need to know where it needs to go,On the base of the new capactor my connections on the green I have brown wire, on black wire I have 2 reds, 1 grey 1 orange, I have blue I put the black wire on the white base could you send me the right information.the number on the capactor P/N 610 - 803 - 51


When you took the old capacitor off did it have the same type of connections as the new one? If so you should have written then down, or remembered the color coding. If it's different then something is wrong. You will probably have to contact the ... Friedrich CP12C10 Wall/Window Air Conditioner

New motor will not start need to know what wire powers hi an low speeds and if motor relays send power to ----------i wired the motor how the instructions said [email protected]


Here is a typicall wiring diagram for a psc motor. http://neilorme.com/pics/PSC_Wiring_Diagram.jpg ... Air Conditioners

I trying to replace the Power cord on my kenmore window ac model 580.75121501 I need to know exactly where the white wire of the power cord goes on the capacitor


If you have 3 post it goes on c <it will have several white wires >. if it has two post it goes with the terminal with more than one wire . if two post <either side does not have certain side >but on terminal with other white wires @ ru ... Air Conditioners

Need to move air conditioner model ASTA30LCC from current home to new build in a different town. electrician needs wiring plan so knows where to make hole in wall ready for unit. Builder on site now wanting this information. Unit wont be removed from present position for another couple of weeks.


... Fujitsu Air Conditioners

Have a teledyne laars lite LLD pool heater and was told that I needed a new ignition control unit. Replacement called for a digital ignition control unit (#RO317500) to use in replacement for model 05-339011-003 that was originally on my analog heater. Paperwork included did not give info on exactly how to wire it to the unit - there is a IND connection and a diagnostic area on the unit that was not on my original control unit. Anyone out there that knows what to do to connect it correctly? I'


... Air Conditioners

No Power Unit will not power up. Display is dead, control panel and remote does not work. Power is present at outlet and power cord. 230VAC detected at Frigidaire part number 5304476450 power board wiring blocks and terminals. Am I to assume this board is bad and needs replacement


... Frigidaire FRA124HT2 12000 BTU ThruWallWindow Air Conditioner

I have a model # faa065p7a A/C The power cord burned out with some sparks by the test and reset part. Called frigidaire and they said you could not replace the power cord and had to buy a new unit. This AC is not very old and worked fine. Is this true because I see that power cords are for sale and never heard of the whole unit going bad from the power cord. Did the electronics fry or was I talking to the wrong person? They were not very helpful and just said to buy a new air conditioner.


Hello, i have replaced cords on many window units so yes you can replace the cord. I believe if you go to a online appiliance website they will have the cord you need. I have found this website online with frigidaire parts http://www.repairclinic ... Frigidaire FAC124 wall/Window Air Conditioner

I have a GoldStar wall AC, model #GWHD6500R. The AC fell off the window. I need to reconect the three wires from the power cord back toguether and see if the unit still works. The wires are colored green, white and black. Can you tell me where the white and black connects to?


... LG Goldstar GWHD5000 wall/window Air Conditioner

Wiring I am replacing a standard Dometic thermstat with a multi-functional therostat ia a Moaco. I can't eem to find a wiring diagram and it s difficult as Dometic uses a ribbon plug. I just need the color of "Power", "Compressor Trigger", and "Fan". The new thermostat has "Fan Speed" if the Dometic unit is compatable, "Fan Speed" triggers would be helpful as well. Thanks in advance, Ron at Viking Marine Services


Maybe try calling Grainger or they might have a website online. Have you googled the brand of your thermostat? Often PDFs pop up with manuals. ... Dometic Rooftop RV Air Conditioner

I have Carrier mod#24ANA760A300 Infinity system. 1.5yrs old. Compressor nor fan outside will start. The controller on unit flashes an error for low pressure switch open (error #32). Gas pressure is normal! My technician says that he will have to order a new compressor because of some checks he has done. What I need to know will the controller show low gas pressure if the unit has never started even though the low pressure switch is closed as it should be with proper levels (checked the switch an


No unless there is a loose connection of the wires or terminals between switch and controller ... Air Conditioners

I have a intertherm model 9007590 AC unit. The condensing unit was changed to a unit that has a common wire and a y terminal and the old condenser unit had three wires at condensing unit. I can't get it to run and I think some of the wiring has been changed. I need to know how the low voltage wiring is suppose to be and if I need a four wire or five wire stat due to the condenser being changed. What stat do you recommend for this unit. Thank you.


The unit with3 wires was set up as a dual transformer the new unit is single transformer system. it needs to be rewired at thermostat,furnace,and ac ... Air Conditioners

Suburban sf30 rv unit.. I had a new board and limit switch installed. The service tech said it was working. I marked the wires when I removed the unit. I re installed the unit conecting the wires the same as when I removed the unit. I have 2 blue wires, 1yellow and 1 red coming from the furnace. There are 3 thermostat wires 1 grn, 1 wht and 1 red---The power source are 2 solid white wires and 2 blk and wht striped wires, there is power to the unit. I am at a loss as to why it will not work. T


... Dometic Rooftop RV Air Conditioner

Need to change a broken blower motor in RUUD central air unit. Old central air blower motor (GE electric) was connected with brown and orange wire to 15 MHD capacitor. Another orange wire from central air unit connected to orange motor wire on capacitor. Black wire from motor (Hi Speed) connected to central air unit. Blue and red wires not connected. New motor is an AO Smith FD6000A. Has Black, brown/white, brown, blue,yellow,red, white and black wires. Need to connect to a 5 MHD capacitor. M


On the motor should be a diagram detailing the wires. brown white goes to either side of the capacitor and brown wire to other side of capacitor. hi speed goes to normally open contact on the indoor fan relay and the wire designated common on the mot ... Air Conditioners

Do I have to use a wiring harness for Klimaire multi-zone mini split or can I hardwire into the power between studs? Are there any cables that need to run from the wall unit to the outside compressor


The specs on that unit dont list the wattage of the head unit. I would be very careful about just tapping into the wiring in the wall. First off you need to know what the wire size is in the wall. The second thing is that you have to enclose it in a ... Air Conditioners

I have a Janitrol Heat Pump Thermostat HPT-18-60 and need assistance connecting my new Honeywell RTH7500D thermostat I have a Goodman Heat Pump System Indoor Unit Model#AWB24-05C REV D Outdoor Unit Model#CPLE18-1 Here is the wiring of the old thermostat Y-Yellow Wire G-Green Wire R-Red Wire O-Orange Wire W2-White Wire E-Blue Wire C-Black Wire Where should each of these be connected to the new thermostats terminals?


... Air Conditioners

I jiust bought a used Balboa DU70CCAH unit. The wires inside look like 8.3 and I have 6.3 at my existing breaker. I need to know if I use 6.3 or 8.3 cable


... Air Conditioners

I jiust bought a used Balboa DU70CCAH hot tub unit. The wires inside look like 8.3 and I have 6.3 at my existing breaker. I need to know if I use 6.3 or 8.3 cable


The wire you should use depends on the amperage the system requires. it may be called 'ampacity' and should be designated on your data plate. also, the type wire you plan to use would also determine the actual size wire required...this is very import ... Air Conditioners

I Have a outside A/C unit I have replaced the fan and I need to know which Capacitor leads go to the Fan, the compressor and the contactor. the capacitor is a 35/5 with one lead with 4 male blade connectors-one with two and one with only one lead. There are also two brown(one with a stripe)wires from the new motor instead of the one on the original motor.


The 2 brown wires go to the capacitor, the solid on the positive or colored dot side, the striped one goes on the other side. ... Dayton Air Conditioners

I HAVE A MODEL 580.74184 KENMORE WINDOW UNIT 18OOO BTU. THE POWER CORD WAS REMOVED BY OTHERS. I NEED TO KNOW WHERE THE L1& L2 CONNECT IN THE CONTROL BOX. BE SPECIFIC


Http://www.applianceaid.com/image/airdiagram.JPG\015\012click the link directly.\015\012It generally is grounded to one of the GND ... Kenmore Air Conditioners

We have a Vulcan ducted heating unit model HX100, recently we have experienced problems with the unit where is it not heating the house, the unit goes on but blowing cold air. We have had a couple of technicians to repair it and still not working. One fixed the switch pressure & the other the flame sensor connection. We have been advised that we may need a new unit or repair the board. As we have an illness in the family, we would like to know whether we need to purchase a new unit as p


\015\012We had the same problem with our carrier heater 4 year or so ago. We had a technician and electrician try to resolve the problem. What the tech suggest was to replace the main component ... Air Conditioners

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || ad-trader.net || Terms of Use || Contact || Privacy Policy
Load time: 0.1851 seconds